|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Downloaded the manual, reasonably straightforward, pretty much exactly as advertised.
 ;
very helpfull
circuit diagram and sparepart list available
;
Very good reproduction (copy) of original manual. Didn't have a parts list, but schematic was completely labeled with parts. Complete instructions on how to adjust mechanical functions of the 8-track deck. Well worth having and at a very reasonable cost.
;
It's a full manual. All the parts are in there. I haven't found the problem yett, but I am working on it; hope I can rebuild the part myself. To make it more secure and unbreakable this time. Because the part has failed several times before and costs a lot to let it be repaired.
Thanks so much for this rich illustrated and parted manual.
;
I downloaded the document. The manual was complete, well scanned and everything was legible. I could zoom in see what I needed to know. There's not much more that you can ask.
HD750
Signal to Noise Ratio 1. Set the mode of the filter to � S/N� mode
2. 3. 4. 5. 6.
Play track 2 of the test disc The unit of the audio analyzer is set to dB mode Press the S/N key on the control panel of the audio analyzer Play track 7 Measure the data of S/N ratio
Dynamic Range 1. Set the mode of the filter to � D-Range� mode
2. 3. 4. 5.
Set the audio analyzer to � DIST� Mode Set the unit of the audio analyzer to � dB� mode Play track 17of the test disc The dynamic range should be |A| + 60dB
Channel Separation 1. Set the mode of the filter to � DIST/CH-SP� mode
2. Set the audio analyzer to � LEVEL� mode 3. Play the tracks 8, 9, 10 & 11 4. The measured results is the difference between L & R channel
De-emphasis 1. Press the � THRU� button of the CD filter
2. Play the track 2 of the test disc 3. Press the � Relative Level� and make it � ON� 4. Select the track 12 and 13 and measure the L & R channels value
10
|
|
|
> |
|
